Off-Grid Pure Sine Wave Solar Inverter (4KW / 6KW 120V) - Built-in MPPT Controll

SPECIFICATIONS

AC output voltage: 110-120VAC -50Hz/60Hz

BMS communication: YES

Battery voltage: 24VDC

Brand Name: SUMRY

Certification: CE

EU LVD Voltage: High voltage: Above 50Vac or 75Vdc

Feature: Hybrid inverter

Feature 2: solar inverters

Feature 3: hybrid solar inverter

Feature 4: Pure sine wave inverte

Feature 5: mppt solar charge controller

High-concerned chemical: None

Is Smart Device: Yes

Model Number: HGX 4KW

Origin: Mainland China

Output Current: 33A

Output Frequency: 50/60HZ

Output Type: SINGLE

Size: 40*25*8.9cm

Support Battery type: lithium battery,LiFePo4, ,acid-lead, etc.

Weight: 9

wave form: Pure Sine Wave

Sumry 4000w Off Grid Solar Inverter 140A 5600W MPPT Solar Charger Hybrid Pure Sine Wave Inverter for Home 6.25 Inch LCD Display Features : 1 off grid solar inverter 2 No battery function available 3 SBU mode :utility power,battery and PV power complement each other

4 Pure sine wave solarinverter

5 Unique glass top cover design with 6.25 inch LCD display and touchable buttons

6 Built-in140A MPPT(Max PV 5600W)solar charger

7 High PV input range from 55V-350Vdc

8 Smart battery charger design for optimized battery performance

9 Configurable AC/Battery input priority via LCD setting

10 Auto restart while PV is recovering

11 Over-load ,overtemperature and output short circuitprotection

12 Cold restart function

13 Built-in lithium battery automatic activation

14 Communication with RS232/RS485

15 WiFi monitoring function (optional )

16 Anti-dust kit for harsh environment(optional)

17 Restore default Settings with one click SUMRY HGX series machine specification ： NSTALLATION STEPS : Firstly，you need to install a circuit breaker between the battery and the inverter, open the breaker after successful installation, then connect 24v the battery , close the circuit breaker, and measure the voltage on the battery side of the inverter. Secondly，install a circuit breaker between the PV input and the inverter, turn on the circuit breaker after successful installation, make sure the battery voltage is normal, let the machine connect to solar energy, then close the circuit breaker between the PV input and the inverter, at this time, the inverter display will automatically light up and start charging, and then press the button on the bottom right corner of the inverter 1 to start the machine. Then check whether there is 110v/ or 120v voltage output from the inverter output. Finally, a circuit breaker needs to be installed between the AC input and the inverter, then a circuit breaker also needs to be installed between the output of the machine and the inverter. After successful installation, turn on the circuit breakers of the AC input and output, then connect the machine to the mains, turn off the mains input circuit breaker, and then turn off the circuit breaker of the output of the inverter after 2 minutes. This is the complete procedure for installing the machine. CIRCUIT BREAKER SPECIFIC